Strip, wax, buff, scrub and seal for VCT, tile, concrete and hard-surface floors across Reno, Sparks, Carson City and Lake Tahoe.
Floors are the hardest-working surface in any commercial building and usually the first thing a visitor notices. Left on a routine mop-only schedule, hard floors dull, scratch and lose their finish — especially in Northern Nevada, where high-desert dust and winter grit act like sandpaper underfoot. Benchmark's floor care program keeps commercial floors protected and looking their best across Reno and Sparks, Carson City and Dayton, and the Lake Tahoe basin.
We handle the full hard-surface lifecycle: stripping old finish and re-waxing vinyl composition tile (VCT), buffing and burnishing for a high-gloss shine, deep-scrubbing and sealing tile and grout, and cleaning or sealing concrete. Each floor type gets the right process and the right products — using the wrong chemical is the fastest way to ruin an expensive floor.
VCT needs periodic strip-and-wax plus regular burnishing to hold a shine. Tile and grout need low-pressure scrubbing and a grout seal to stay sanitary. Polished concrete needs pH-neutral cleaners, not acidic ones that etch the surface. Natural stone needs its own specialized care. We match the protocol to the material and to your traffic level — lobbies and corridors need more frequent attention than back offices.
Floor care pairs naturally with a recurring janitorial program or office cleaning contract, so one vendor keeps daily maintenance and periodic restoration on the right schedule. For soft floors, see our commercial carpet cleaning. And if you'd like a deeper primer on hard-surface wear in our climate, read our guide to caring for floors in Northern Nevada's climate.
We identify the floor type, current condition and traffic level to build the right plan.
Furniture moved, edges protected, old finish removed cleanly where a strip is needed.
Fresh finish or seal applied in proper coats and given time to cure correctly.
Burnishing for shine, plus a maintenance cycle so the finish lasts as long as possible.
pH-neutral and manufacturer-approved products so warranties and finishes stay intact.
Strip-and-wax scheduled overnight or over weekends so your business never stops.
Dust and grit mitigation built for high-desert and winter-traffic conditions.
We prioritize lobbies, corridors and entries where wear shows first.
Non-slip coating options to help meet walking-surface safety requirements.
A recurring plan that prevents the costly full restoration down the road.
We provide floor care throughout the Reno-Sparks metro, the Carson Valley and the Lake Tahoe basin. Choose your area for local details:
It depends on traffic. High-traffic lobbies and corridors often need a full strip-and-wax once or twice a year with regular burnishing in between, while lower-traffic areas may go longer. Consistent buffing and scrub-and-recoat maintenance extends the time between full strips considerably.
Yes. Floor work is disruptive by nature, so we schedule strip-and-wax and deep scrubs overnight, on weekends, or during closures. We section off areas when needed so parts of your facility can stay open.
We service VCT, ceramic and porcelain tile, grout, polished and sealed concrete, natural stone, and most commercial hard surfaces. For hardwood, LVP and laminate care specifics, see our floor-care guide.
Yes — commercial carpet cleaning (hot-water extraction and encapsulation) is a separate service we provide, and many clients bundle hard-floor and carpet care into one schedule.
We provide commercial floor care across Reno and Sparks, Carson City and Dayton, Minden and Gardnerville, and Lake Tahoe.
Hot-water extraction and encapsulation that lifts stains, allergens and odors.
Recurring janitorial programs built around your building, schedule and budget.
Daily and scheduled cleaning that keeps your workplace spotless and your team healthy.
Rough, final and touch-up cleans that turn a finished build into a move-in-ready space.
Streak-free interior and exterior glass, partitions and entryways.